How to Fix Android Stuck on Logo For Beginners and Laymen, Overcome Without Losing Data!
Even though Android phones are getting more sophisticated, that doesn’t mean they are free from problems and constraints. And one of the severe problems on HP that is quite difficult to overcome is bootlop. The main feature, the stuck screen displays the logo. Well, below the author has prepared several ways to fix Android stuck on the logo.
What is Bootloop or Stuck in the Logo?
By definition, Bootloop is a condition in which the Android software fails to enter the system. The hallmark of this condition can be seen from the Android logo or the manufacturer that continues to appear.
Meanwhile, based on the level of damage, there are two types bootloop. Among others bootloop light or light bootloop and hard boot loop or heavy bootloop.
For light bootloop, usually this type only lasts temporarily. If you wait a while or you force restart device, the problem can be resolved by itself.
Whereas for heavy or severe bootloop, is usually the easiest condition to make users dizzy. You see, in this condition, the cellphone is stuck on the logo for a long time.
Why is HP stuck on the logo?
Summarizing the experiences and reviews of many smartphone users, there are several reasons that cause bootloop. Consist of:
Wrong Step When Flashing HP
Indeed, flagshing can make the device look like new again. As if it had just been unpacked from the packaging box. But, it’s better if you leave it to a technician to carry out this step.
Indeed, the steps are not too difficult. However, if the wrong steps, the consequences can be fatal. And the result that is most often faced by ordinary users is that the cellphone is stuck in the logo or bootloop.
Root System Failure
Previously, the author has described at length about what root Android phones are. And it is also mentioned that rooting an Android phone can harm the device.
The reason is, if you make a wrong step when running the rooting process, it can cause the cellphone to be stuck on the logo continuously. So, even though there are now many options for rooting Android cellphones, it’s best if you do it accompanied by a technician or an expert.
Wrong Adjust permission
The Android operating system requires permission to access various types of device data so that its services run optimally. Types of data accessed such as location, contacts, to photos.
Perhaps, you want to maintain device privacy by setting the permissions of every available application. However, if the wrong permission is blocked, it can result in system failure. Then, you will also find a screen that only displays the Android or vendor logo.
Pretty dangerous, right?
How to Fix HP stuck on the logo?
After knowing some of the causes of the cellphone stuck on the logo, now is the time for you to take the steps to overcome it. Based on the type of damage, you can try some of the steps below.
Repairing a Light Bootloop Damaged HP
From the explanation above, it can be concluded that this is the easiest type of bootloop to overcome. There are several steps you can try to do.
First, force restart device. You do this by pressing and holding the HP Power button for a while. Hold until the Android or vendor logo disappears from the screen. If so, remove the SD card, phone number card, and battery (if the cellphone is equipped with a removable battery).
Next, let it sit for a few minutes. It could be 30 minutes, or 24 hours. If so, put all the components back in place. Starting from the SD card, phone number card, and battery. Finally, turn the device back on.
Overcoming Heavy Bootloop
Well, to overcome a heavy bootloop, the author actually recommends that you leave the device to a technician. At least, the process can take place more safely and without the potential for additional damage.
However, if you want to do it yourself, you can try the following steps. First, run factory reset. For that, you need to log in to Recovery Mode. Usually, the way to enter Recovery Mode is to press the Home + Volume Up + Power buttons simultaneously.
If so, use the Volume keys to move the cursor on the screen. Select the Wipe Data/Factory Reset menu, then press the power button to run the command.
Next, move the cursor to Yes-delete all user data, then press the Power button again. Once this step is done, the operating system will process your request for a factory reset.
For the record, a factory reset will usually return the HP to its normal condition. Like the condition when you use it for the first time.
But, the bad impact, all data stored on the device will be erased. Starting from application data, contacts, documents, to user’s personal data.
Well, those are some ways to fix Android stuck on the logo. The explanation above has been adapted for beginners and ordinary people. So, if you are not familiar with smartphone technicalities, you can carry out the steps above without worrying. Good luck!
Post a Comment for "How to Fix Android Stuck on Logo For Beginners and Laymen, Overcome Without Losing Data!"