2 Ways to Use HDD Regenerator, Easy! (100% Working)

What’s that HDD Regenerator? HDD Regenerator is an application that is used to repair or regenerate damage to a hard disk (bad sector hard disk). The hard disk has a very important role on a laptop/computer, namely to store data on the computer, such as photo files, music, audio, video and the operating system of the PC.

Like other devices, hard disks can also be damaged which will cause the application process to be slow, data is difficult to use/access, can disrupt the stability of the computer operating system, even worse, your data will be lost and hard disk failure occurs. In short, this damage will result in the hard disk not responding to read or write requests from the user.

There are two types of bad sectors on the hard disk, namely hard bad sectors and soft bad sectors, the following are the factors that cause these two types of bad sectors.

1. Cause of Hard Bad Sector on Harddisk

• Hard drives have started to wear out due to age.
• Hard drive that is too hot / overheated
• The hard drive is physically damaged due to being dropped/crashed or shaken.
• Unstable electricity.
• Other hardware that is worn and affects hard drive performance.
• The hard drive is dusty and some sectors are damaged.
• There is a virus or malware on the computer/laptop
• The liquid on the SSD flash memory may have dried.

2. Cause of Soft Bad Sector on Harddisk

• The hard drive is infected with a virus or malware.
• The computer does not shut down/shutdown properly in other words it is forcibly shut down or shuts down unexpectedly.

Well, to overcome bad sectors on the hard disk caused by internal factors, you can use the HDD Regenator application which you can download freely on the internet. This application will help you repair a damaged hard disk without changing the data on the hard disk so that the stored data will be the same as before. For further explanation, let’s see the explanation below.

How to Use HDD Regenerator

The interface of HDD Regenerator is very simple and human friendly because it is easy to understand even for the layman. How to use HDD Regenerator? Here below is the explanation.

A. Bootable Method

1. Download the HDD Regenerator application on the internet.

2. Install HDD Regenerator on your computer or laptop.

3. Open HDD Regenerator on your computer/laptop.

4. To repair bad sectors on the hard disk, you are advised to choose a bootable method, namely by using a flash drive or using a CD/DVD. The trick is to select one of the options in the main HDD Regenerator window such as Bootable USB Flash or Bootable CD/DVD. Here, I choose Bootable USB Flash. (Insert the flash drive that will be used first to your computer)

5. Here, I choose flash drive/flash drive which I will use to create the boot. Click OK.

6. Then, click OK to remove and make boot on flash drive/flash drive.

7. Now, select the option Yes to me-restart all computers/laptops to boot on flash drive

8. During the restart process, enter your BIOS, go to the Boot tab, then boot setit becomes a flash drive that will be used to regenerate the hard drive.

9. Next, select and enter option 1 or 2 to continue regeneration. Option 1 is to scan the flash drive while option 2 is to scan the hard drive.

10. Enter the options for the method to be used.

• Number 1 to scan and repair the hard drive.
• Number 2 for scanning only.
• Number 3 for regenerate all sectors in a range.

11. Then fill in the nominal megabytes, just press M on the keyboard then Enter and the process will run.

12. Wait until the process is complete.

B. Through Active Windows

1. Download the HDD Regenerator application on the internet.

2. Install HDD Regenerator on your computer or laptop.

3. Open HDD Regenerator on your computer/laptop.

4. Here I will regenerate the flash. You do this by clicking “Click here to repair physical bad sectors xxxx” meaning that regeneration is carried out directly in Windows.

5. Here, I choose flash drive/flash drive which is regenerated. Click OK.

6. Enter the options for the method to be used.

• Number 1 for prescan (just to know bad zones)
• Number 2 for scanning with or without repair.
• Number 3 for version info
• Number 4 to display statistics

Here, I want to know only bad zones, so I choose option 1.

7. Wait until the prescan mode is finished.

8. The result will look like in the image below.

That’s the discussion about how to use HDD Regenerator. Well, hopefully the discussion that has been described above is useful and good luck. Thank you!

“If you’re doing your best, you won’t have any time to worry about failure.” H. Jackson Brown, Jr.

Share :