How to Flash Redmi Note 3 MTK Matot

Flash Redmi Note 3 MTK Matot – One of the most effective ways to get rid of viruses and malware that attack smartphones is flashing. This method is also very effectively used to overcome errors, boot loops, and hard bricks, aka total death. Even with the flashing method, my friend can return from Custom Rom to original Rom.

Therefore, if you are a Redmi Note 3 user who is experiencing a total dead condition, you can apply this flashing method to overcome this. If you don’t know how, my friend can follow the flashing tutorial for the Redmi Note 3 MTK that will not work, which will be mentioned in the post below.

Causes of Redmi Note 3 Hardbrick

Redmi Note 3 experiencing hard brick aka completely dead is not surprising. Conditions like this are common when someone flashes. The reason for flashing, of course, is because the default official rom of this phone is China Stable. For this reason, many Redmi Note 3 users want to change the default rom to Global Stable.

If you use the default rom, there will be a lot of application features that can’t be used. This will certainly reduce your comfort and freedom as a smartphone user who wants to use his device in various activities and activities he wants. In addition, the available language options are only English and Chinese, not Indonesian. Therefore, flashing is needed to be able to use the Global Stable rom.

If you are used to using English or Chinese, of course it will not be difficult if the language used on the smartphone uses one of the two languages. But if you’re not used to it, you’ll be in trouble. Well, the solution that can be done to overcome this is to use a Global Stable rom.

Apart from flashing, a failed Redmi Note can also be caused by a corrupt operating system, incorrect TWRP installation and much more. So, if you are in a situation like this, what will you do? Don’t rush to take it to the service center, because my friend can try the repair steps by following the way to flash the Redmi Note 3 MTK, which will be mentioned below.

Details of How to Flash Redmi Note 3 MTK Matot

It has been mentioned above that one of the causes of the Redmi Note 3 experiencing a crash or hard brick due to the Android operating system experiencing an error. If the condition is like this, it needs proper handling, it should not be careless.

Because the condition of the cell phone is hard bricked, the treatment that can be done is to use the test point method. That is, my friend inevitably has to disassemble the Redmi Note 3 to find that point.

Oh yes, this test point method can later be used on the Redmi Note 3 which is stuck in Qualcomm USB 900e mode.

Tools that Need to be Prepared

Before starting to flash the Redmi Note 3 MTK dead using the test point method, my friend must prepare the tools first. In this case, the tools that need to be prepared are as follows:

Small Screwdriver

The small screwdriver in question here is a special screwdriver for disassembling the cellphone. If you don’t have one, just borrow it from a friend or neighbor who has. If you don’t want to bother, just use other things that are sharp and about the size of a bolt on your phone. Just try using a cutter or kitchen knife.

Copper Cable

The required copper cable is free, because it will only be used as a short contact.

PC or Laptop Using Windows 7

In order for the Redmi Note 3 MTK flash steps to run later, you need the help of a PC or laptop that uses the Windows 7 operating system. If your PC or laptop uses a version above, then you must disable Driver Signature first.

USB Cable

Please note that the USB cable required here is the original one. If you don’t have the original, just use another data cable as long as the cable quality is good.

Materials needed

In order for the Redmi Note 3 MTK flash process to run smoothly, you still need additional ingredients. In this case, the materials needed are as follows:

MiFlashTools version 20210425

The first ingredient you need is MiFlashTools version 20210425. For this version of MiFlash already includes drivers which certainly support 32bit and 64bit Windows. That way, you don’t have to bother anymore to install the driver again.

Fastboot ROM Redmi Note 3 Pro

The next material you need to prepare is the Redmi Note 3 Pro Fastboot ROM. Of course you need to download it first. After the download is complete, rename the file ending in .tgz/tar to .zip. After that proceed to extract the file and put it in a folder that is easy to remember.

HS-USB QD Loader Driver Download

You also need help Download Driver HS-USB QD Loader to run the above process. Oh yes, the function of this driver is none other than to make it easier for you to enter EDL (Emergency Download Mode) mode.

Minimal ADB and Fastboot

Other ingredients that you also need to prepare for the fastboot command are Minimal ADB and Fastboot.

Read also:

Steps to Flash Redmi Note 3 MTK Matot

After all the equipment and materials mentioned have been prepared, my friend, then the way to flash the Redmi Note 3 MTK mato can be run. The steps are as follows:

First, first install MiFlash tools on your PC.
Proceed with extracting and installing the HS-USB QD Loader file. Just click next until the installation process is complete.
After that, progress continues to disassemble your friend’s Xiaomi Redmi Note 3. It’s easy, you just need to remove the battery cover.
Because there is a flexible fingerprint on the battery cover, you have to remove the socket first so you don’t get damaged.
After that, my friend just continues the progress by opening all the bolts attached to the motherboard / machine. This needs to be done so that the test point behind the machine can be seen.
Next, remove the battery socket.
Continue by connecting your Xiaomi Redmi Note 3 Pro to your PC using the help of the original USB cable.
Then just turn the motherboard over and make a short contact at the test point using the copper cable that you prepared earlier.
To check, my friend can see it in Device Manager, precisely on the Port menu (COM&LPT) a Qualcom HS-USB QDLoader 9008 will appear without a club sign.
Continue by opening the MiFlash Tools software, and clicking Refresh.
After Refresh, COM4 will be detected. The number in front of COM will usually appear different, it can be COM2, COM3, COM5. The difference depends on the PC or laptop you are using.
Continue the progress by inserting the Redmi Note 3 Pro Fastboot ROM. The trick, my friend must look for it through the Select menu. If you have found it, click OK.
Pay attention to the menu at the bottom of the MiFlash Tool. Make sure you check the Clean All menu. The goal is that the flashing process is really clean and bugs in the ROM can be minimized.
Continue by selecting FLASH. The installation process will run automatically. Well, my friend, just wait until it’s finished.
If so, please unplug your phone from your PC and try turning it on again.

Those are the steps on how to flash the Redmi Note 3 MTK automatically that you can follow. Oh yes, it should be noted that after all the steps above are completed and you turn your phone back on, the booting process may take a bit of time. So my friend has to wait patiently.

GoFlay.com