How to Fix a Dead Headset on the Left

Surely you are already familiar or maybe including people who can’t let go of the habit of using a headset? In using it, of course, you may have experienced problems with your headset turning off one side? Well, you need a way to fix the dead headset on the left.

For those of you who have problems where your headset doesn’t make a sound or turns off, this will certainly interfere with your comfort and activities in using it, right? Later you might spend which money to buy a new headset. However, wait a minute you can use a car to fix it.

How to Fix a Dead Headset on the Left

A broken or one-sided headset is annoying, you won’t get the same experience and comfort in using it. The reason is that when you use a dead headset, the sound that will be produced will be very small. If you use it for a long time, of course you will not feel comfortable when using it.

You also don’t have to be too hasty in deciding to buy a new headset, you can prevent spending on buying a new headset if you can overcome or repair it. However, before that, we will discuss a little about some of the causes of damage to the headset that causes it to die, one does not work next to it.

The Occurrence of Damage to the Headset Cable

First, you can connect the headset to your cellphone or laptop.
Then you can proceed with playing music or audio files.
Next you can start to feel the bend of the cable starting from the end of the headset plug to near the ear.
If you hear a sound when you touch the part, it can be ascertained that there is damage where the cable is disconnected.
So, you can fix it by cutting the inside, then you can look for the disconnected cable between them. Match them with the same color wires then you can connect and start joining them together using tape.
You can check again by turning on music or movies and audio files on your cellphone.

Damage to the Speaker Terjadi

If you’ve tried the first procedure, but you don’t hear the audio, then it’s likely that the damage came from the headset speaker or the head of the headset.
You can start by opening or removing the headset speaker by slowly disassembling it.
Then you can remove and disassemble the plastic cover.
Then you can check on the speaker of the headset by checking whether the end of the cable is disconnected or not. Make sure both are connected to the headset speaker chip.
Next you can continue if there is a broken cable by soldering the cable to the chip on the speaker.
When you’re soldering you have to make sure that the solder isn’t too hot and doesn’t come into contact with your hands or other parts of the headset.
If it is dry on the lead you have to make sure that the cable is connected.
If so, you can close it again properly.
Then you can check it by turning on music, video or other audio files on your phone.
Finished.

Well, that’s an easy way you can do to fix a dead left headset. That is all and thank you.