How to Hack Websites with CMD 2021

If you are currently looking for a way to hack a website using CMD, then the following basic commands can be used.

2. How to Hack Websites with CMD – Tracert

How to Hack Websites with CMD – Tracert

In addition to Tracert you can also call it the CMD hack script name Trace Route, just as the name suggests you can also use this command to track IP addresses that are already in the pack.

The IP address has been taken in order to reach the destination.

In fact, this command will also calculate and display the number of each jump needed to reach that destination.

As for how to hack a website with CMD, namely, as follows:

Open CMD
Then type Tracert (IP Address), or you can also use tracert (Website Address) for example like the following “tracertyourname.com“.
Finished.

3. How to Hack Websites with CMD – Nslookup

How to Hack Websites with CMD – Nslookup

Nslookup is a CMD command in the form of a tool that contains a network command line.

This will later help you to get a Domain name or IP address mapping on a particular DNS record.

Example:

If you have a website URL and want to know its IP address, then you can use these types of commands.

Here’s how to hack a Website with CMD NsLookup:

Open CMD
Type Nslookup (space) URL address, for example as follows “nslookup jakakeren.com”
Finished.

So now you can find out the IP address used in your website URL.

You can replace the name in the jakakeren example with your name.

4. How to Hack Websites with CMD – Ping

How to Hack Websites with CMD – Ping

The next way is to use the CMD hack Ping script, which can be used using an internet connection.

This is to send some data packets to certain sites, and these packets will later be returned to your PC.

This Ping command will also show the amount of time it takes to reach a certain address.

Or simply, this ping can help you to see if the host you are using this ping command is alive or not.

With this ping command you can use it to verify whether the PC can connect to a TCP/IP network or not.

Here’s how to hack Websites with CMD with Ping:

Open CMD.
Type Ping 8.8.8.8 to go to Google.
And the step is complete.

Now, you can change this Ping 8.8.8.8 to www.google.co.id or use other sites that you want to Ping.

5. How to Hack Websites with CMD – ARP

How to Hack Websites with CMD – ARP

This one command, CMD hack can help you to modify the ARP cache, you can even run this command on any PC.

This can be used to see if your PCs have the correct MAC addresses registered to others to ping each other and successfully to the same Subnet.

This command will also help you to find out if someone is trying to misbehave on your computer’s LAN.

Here’s how to hack a website with CMD ARP:

Open CMD.
Type arp -a at the Command Prompt.
Finished.

6. How to Hack Websites with CMD – IpConfig

How to Hack Websites with CMD – IpConfig

This last CMD hack script is a very cool command, in fact this one command is able to show everything that is very useful.

For example, such as IPv6 addresses, temporary IPv6 addresses, Subnet masks, IPv4 addresses, Default gateways, and many other things you want to know.

Well, to try how to hack a website with CMD, let’s go directly to the following guide:

Open CMD.
Type ipconfig or ipconfig /all in the Command Prompt.
Finished.

The final word

Those were the recommendations for several ways to hack using the CMD command that we can share, and you can try to apply them.

The method that we described above can help you to find out the IP address of a site or website.

Some of these methods are quite easy, because you only need to use the Command Prompt command.

Don’t miss our other articles about CMD command to hack IG and how to hack PHP website.

There is also about the CMD code to hack lights, how to hack CCTV with CMD and how to hack pulses with CMD.

That’s our whole discussion in this article about how to hack website with CMD 2021. Hopefully useful and good luck.

GoFlay.com