How to Calibrate an Android Mobile Phone Battery 2021

– The battery is one of the most important things in a cellphone.

Usually, the battery used by various types of HP is a rechargeable battery or can be replaced if damaged.

However, the battery cannot be used continuously because it has a long life if it is damaged.

As time goes by, the battery life will continue to decrease due to HP usage with almost 24 hours.

Moreover, if the device is used too much every day, then the service life can also decrease faster.

The system on a new device is usually able to read the battery status quickly and precisely.

But when the battery starts to have problems, the system may have difficulty reading the battery status accurately.

If that happens, the battery may already be calibrated for it.

Discussion on How to Calibrate an Android HP Battery

Android smartphone users can usually find out the status of the battery used by the cellphone.

It’s just that the system does not always work or work in reading battery status.

In addition, the data displayed sometimes does not match the facts.

For example, the battery status shows that 90% of the power is still available and can last up to the next 12 hours, but the phone turns off shortly after because it ran out of power.

If you experience this kind of thing, then you can calibrate the Android cellphone battery that you are using.

Then what is meant by battery calibration? Battery calibration is the process of normalizing the battery so that its real status can again be read by the system accurately.

If you are confused about how to calibrate the battery on the Android cellphone you are using, you can see it in the review on how to calibrate the Android cellphone battery below.

How to Calibrate an Android HP Battery

1. How to Calibrate an Android HP Battery with Root Access

How to Calibrate an Android HP Battery with Root Access

You can also do a way to calibrate the Android battery with root access.

This method has basically the same process as the method without root, but here you have to use an additional party app to make it even better. Unfortunately, if the third party app asks for a list of the permissions of the device you are using.

If this method makes you worry about the security of the device you are using, you should not do it.

However, if you want to use it, you can see it in the review below.

Come on, see how to calibrate an Android cellphone battery with root access like the following steps:

The first step, let your device run out of battery until it turns off by itself.
Then, charge the battery without turning on the device and leave it fully charged until the screen indicator shows 100%.
Then, unplug the device from charging.
After that, turn on the device.
If the battery indicator on the screen does not show 100%, you can charge the battery again until the indicator shows 100% and leave your device on.
Next, unplug the device from the charger and then restart it.
If the battery indicator doesn’t show 100% again, charge the battery again to 100%.
You can repeat this cycle until your battery indicator shows 100% after restarting the device without connecting to a charger.
Next, download and install the Battery Calibration application which you can download via the following link download and install the Battery Calibration application.
Before you run it, make sure your device’s battery indicator is at 100%.
If it is run, then restart the device.
After the device restarts, immediately run the application and recalibrate the device battery you have.
After calibration is complete, allow your battery to empty without recharging and let it turn off by itself.
Then recharge the battery fully in the off state without any interruption.
Finally, your Android system battery percentage will be reset.

2. How to Calibrate an Android Phone Battery Without Root Access

How to Calibrate an Android HP Battery Without Root Access

The simplest way to calibrate the Android battery is to charge the battery fully and then unplug it or not remove the battery, but disconnect it from charging.

This method you can do without requiring root access, so you can do it easier and faster.

Here’s how to calibrate an Android cellphone battery as reviewed below:

Let your device run out of battery until it turns off by itself.
Then, charge your battery without turning on the device and leave it fully charged until the screen indicator shows 100%.
Unplug the device from the charger.
After that, turn on the device.
If it turns out that the battery indicator on the screen does not show the number 100%, charge the battery again until the indicator shows the number 100% and leave your device on.
Then, unplug the device from the charger and restart it.
If the battery indicator comes back and doesn’t show 100%, you can charge the battery again up to 100%.
You can repeat this cycle until the battery indicator shows 100% after restarting the device without connecting to a charger.
Then, leave the device without charging until the battery is empty and turns off.
Next, charge the battery fully once again without any interruption.

The final word

How, very easy isn’t it? You only follow the steps above if you are going to calibrate the Android cellphone battery you are using.

You can choose one of the methods above which you think is easy and fast, but you must remain careful and follow the method above correctly.

If your Android cellphone battery is indeed unreliable or in use, replacing it with a new one is a very good solution. Because today’s cellphone batteries cannot be removed, for that you have to come to a service center for help.