How to Remove Headset Images on All HP Brands
When you see that the headset image on your cellphone doesn’t disappear and the notification persists for a long time, you need a special trick. To solve this problem, see and run the following ways to remove the headset image. Can be applied to various brands of HP, you know.
It’s no secret that Android devices are easier to use than iOS. This is what makes this operating system used by most smartphone brands.
But, at the same time, Android also has many weaknesses that often confuse users. Starting from the case hardware or hardware, until the problem in the software.
Sometimes, the problems encountered are difficult to identify and identify. Even so, you don’t need to worry. Every problem, there must be a solution. No exception to the problem of the headset image that keeps appearing.
The problem with this Android phone also does not look at the brand. Almost all brands of Android HP have the potential to experience it. Whether it’s HP Xiaomi, Oppo, old Samsung, to Asus.
But, again, don’t worry, there is a solution to solve this problem. And this time, team Droila have collected from various sources the most effective way to remove the headset image on the cellphone. Want to know?
Causes Headset Image Keeps Appearing on Android Phone Screen
Before we enter the discussion of solutions, it would be nice for readers to know in advance what causes the headset image to appear on the cellphone screen. So, you can minimize the same event happening again.
Based on search Droila There are several possible factors causes the headset image to appear continuously. Among others:
- There is water in the headset plug
- The user removes the headset while the music or video is still playing
- HP plunged into water, so the screen jammed (freeze) on one view only
After knowing the possible causes of this condition, now is the time to discuss method remove the earphone mark on the cellphone when it’s removed. Scrolling never again, bro.
How to Remove Headset Marks on HP
Please calm. For users who are facing problems where the headset image keeps appearing on the cellphone screen, directly apply one of the steps below, yes.
Method 1: Restart Device
If the problem is caused by an error in the software or software, should restart the device is enough to solve. In addition, various problems faced by the device can also be overcome at once through this method.
Whether the phone temperature is rising, the performance is slow, the memory is full, to the screen freeze.
After the device restarts, make sure the headset icon has disappeared. If the headset image still appears on the screen, then it’s time to run the second step.
Method 2: Turn Off The Device Then Remove The Battery
Indeed, most new phones are equipped with a built-in battery. Even so, there are still some devices that use removable batteries. For readers who use this type of cellphone, removing the battery can be the second solution to overcome this problem.
This method can also solve the problem where the screen freeze or stuck on one view only. By removing the battery, the power source will be lost. So, the phone will turn off by itself.
It should be noted, do not do this step too often. You see, it can affect the health of the software from the cellphone you are using. So, apply it if you really need it, okay?
Method 3: Reinstall the headset and then remove it
Although this method is still an assumption because there is no technical explanation behind it, there’s no harm in trying, right? Moreover, many HP technicians recommend this method.
It can be concluded that if you put the headset back on and then remove it, it can solve the problem at hand.
Method 4: Clean Dust and Dirt from Headset Plug Port
Without you knowing it, the headphone jack has a small switch that functions to identify headphones. When the switch is covered with dust, it can cause a jam so that the eraphone sign appears continuously when it is unplugged.
Therefore, the user needs to check whether there is a build-up of dust on the headset plug. If there is, clean the plug. You can use cotton or cotton bud. What is clear, do not use sharp objects, yes. Because it could potentially damage the headphone switch that is inside.
Method 5: Use Vacuum Cleaner to Clean Water and Dust from Phone
As mentioned above, water and dust can also be the cause of the persistent headset marks. So, how to remove the headset image that you can do is to clean the phone from water and dust in the device.
To make things easier, you can use vacuum cleaner. You can point the muzzle of the vacuum cleaner at the hole in the device. Starting from the USB cable plug, plug headset to the air holes that are usually used to remove heat.
If you don’t have vacuum cleaner, you can really put the device in a pile of rice. The reason is, rice stores temperatures that can help evaporate water in the cellphone. Place it for a few hours for the water to completely evaporate and disappear.
Conclusion
After the description of today’s HP tips on how to remove the headset image. To be sure, stay calm if you face this problem. Run the steps above, then you can see the headset image disappears.
Post a Comment for "How to Remove Headset Images on All HP Brands"