How to Overcome a Broken HP Power Button

The HP power button is broken? Surely you are confused to turn on or turn off your own cellphone. As we know the power button itself is one of the most important components in a cellphone. The broken power button is one of the most common problems in mobile phones.

With the damage to the power button in a cellphone, it will certainly hamper the function and the performance of the cellphone itself. That way, of course, it will be difficult for you to do activities that require the help of the power button.

How to Overcome a Broken HP Power Button

There are so many difficulties that you can get when the HP power button is broken and will hinder your activities that need the help of the cellphone.

You also have to spend deep enough to service or fix the power button. So, you should know some of the reasons why the HP power button is damaged.

Causes of Damaged HP Power Button

Your age or cellphone age is too long, generally above 2 to 3 years
Poor usage like you often press too hard
There is a component defect or defect from the factory itself
The occurrence of a short circuit in the power short line or comes from a short circuit. You can find out if your cell phone always turns on by itself or turns off by itself.
The power line is not connected or disconnected, for example before being exposed to liquids such as water or oil
The IC on the power button is broken. IC Power itself is a component that has the function and task of regulating the power source on your cellphone which will give a signal to turn on your cellphone.

Well, if you already know some of the causes of the broken HP poer button, now we will discuss some ways to overcome it.

How to turn on the cellphone if the cellphone’s power button is broken

Here we will discuss how to turn on the cellphone if the HP power button is damaged.

Using Toothpicks

First you can use a toothpick to overcome the HP with a broken power button. This method you can do for HP with a broken power button and only leaves the rubber part in it. You can also use a SIM card ejector too. You also need to pay attention not to use sharp and pointed objects for toothpicks – even make sure you’ve made it a little more blunt, yes.

Using the Double Tap to Wake Feature

Next you can use the double tap to wake feature where you don’t need to turn it on using the power button again. This feature is on smartphones with the latest types and releases at this time. You just have to tap twice to turn on your phone or unlock it.

You must have the Double tap screen on and off application first, yes.
Then you can start activating the feature with the Double tap to screen on option.
After that you just click OK
Then temporarily turn off the phone screen you can open the default application on your phone. Screen Off is the default application for setting permissions.
Finished

Using Biometric Sensors

Finally, you can use the fingerprint sensor. The latest cellphones currently have a level segment up to a flagship which of course has a fingerprint or face unlock. Here’s how.

First of all you have to go to settings on your phone, go to the Lock Screen and Password menu
Later you can see the Add fingerprint sub menu, click the sub menu.
Then you can choose the option according to your needs, be it PIN or Pattern
You can enter the PIN or Pattern you created
Next you will be asked to scan your fingerprint first. If you have clicked Done.
Done, then you can open it with a fingerprint without using the damaged HP power button.

Good luck!