How to Overcome a Black But On HP Screen

Surely you are having problems on your HP right? Where is the state of your cellphone on but the screen is blank black. Of course you will be panicked. This is how to solve a black HP screen but it’s on.

A situation where your cellphone screen is blank black or dark but this flame often occurs when you don’t care about its use properly. So, you need a way to overcome a black but on HP screen.

The state of the cellphone that is on but the dark screen is indeed often causes panic. Generally this happens because we use the cellphone without considering the condition of the cellphone properly. This cellphone on with a black screen is an indication of a damaged HPP.

How to Overcome a Black But On HP Screen

You also have to know the condition of the cellphone that is on but your cellphone’s LCD is dark or the black screen can be due to many things.

Among them can occur due to Bootloop, instability in your HP system, Damage to the HP battery, damaged LCD conditions until there is an HP system that is unable to load certain data so that it will cause the error,

Immediately, here are some ways that we can do to overcome the Black HP screen but you can try it easily:

Removing Memory, SIM Card and Battery (If not a built-in battery)

The first way you can do when your cellphone is having a blank or black screen problem is to remove the memory, SIM card or battery.

This method is considered very effective where later problems that occur on your cellphone can return to normal. You can start by turning off your cellphone, because this blank condition is actually still on.

Next, you can immediately remove the 3 components, namely SIM, memory and battery if it is not a planted battery.

Next you can pause for a while before you pair it again. Well, if you have paired it again, you can immediately restart your cellphone. This method is a common method that is usually done when recognizing a black black cell phone.

Clearing Cache In System

Next, if you have used the first method, you can continue in this way, which is to clear the cache on your HP system. This is an attempt so that your cellphone does not experience a blank HP screen error. Well, here’s how:

You can turn off your cellphone again then press the Power button and Volume Up or Volume down simultaneously.
Then you will automatically see the recovery menu where you can directly select the Wipe cache option.
Done, you just need to wait a few moments.

Reset HP

The next way you can do is to reset the HP. This method where later you will use the same steps when deleting the cache, only different in the fourth stage.

You will go into recovery and select the Factory reset option. Later your phone will return to its initial state. However, to do this you have to make sure the dictionary data is safe.

Re-Flash HP

Next you can solve it by re-flashing your cellphone, which way you can do this when your cellphone can’t be tampered with. You can do this with the consequence of losing all your data that is on your cellphone.

The trick is that you install the re-flash driver on your Laptop then you can directly connect it to the HP USB. After that you can continue by extracting by following the instructions in it.

Bringing to the Service

Finally, you can use a method that will cost you money, this method you can do if the method above doesn’t work. It is not certain that this will return 100%.

However, if you take it to the experts of course it has a good possibility too. However, of course there is a risk where your cellphone will experience smallpox because it is dismantled. You will also spend money.

Thanks and thanks.